Oil Baths

- The product INS-PC · Replacement power cord has been added to comparison list.

Low form, glass open vessels coated with Instatherm. Designed to operate up to 250ºC, heating response time is very rapid, (5° per minute), with very low thermal lag. The bottom is uncoated so the bath can be put on any popular magnetic stirrer for stirring while heating. Baths are designed to run with oil or a heating media. Never run Instatherm baths dry or breakage can occur, especially at higher temperatures. Capacity is without a vessel. Voltage should not exceed the rated voltage of the temperature controller. Includes controller cord and sensor/temperature clip.
Catalog Number	Capacity, mL	Maximum Applied Voltage (Volts/Amps)	Bath Size (Diameter x Height)	Temperature Controller Compatibility
INS-70	160	20V/5A	70 X 50 mm	Low voltage bath compatible with Model 410 and Model Trinity controller
INS-100	340	40V/6A	100 X 50 mm	Low voltage bath compatible with Model 410 and Model Trinity controller
INS-125	700	40V/8A	125 X 65 mm	Low voltage bath compatible with Model 410 and Model Trinity controller
INS-150	1200	120V/5A	150 X 75 mm	Can be used with any of J-KEM's digital controllers
INS-190	2600	120V/10A	190 X 100 mm	Can be used with any of J-KEM's digital controllers